WHAT IS TORLUK?
Forests are cleaning by cutting and pruning the trees that need to be cut with the aim of creating the ideal tree density required in the framework of the criteria determined by the forests management for the healthy development of the forests.
According to the type of woods produced as a result of the cuts, wood is used by the timber factories are as a raw materials, or used by charcoal or firewood producers
Charcoal is formed by pyrolysis in low oxygen environment (pyrolysis). It is produced by traditional method which is widely used in our country .
The story of a Charcoal begins with cutting or pruning the tree.
The picked woods are arranged vertically in a similar manner to an inverted funnel to form a chimney hole in the middle. This prepared wood pile is called a torch. Dome-shaped stacks of wood are covered with straw or dry leaves and clayey soil to prevent air intake. Any space can cause the air to get very airy, which can cause the fire to burn or the fire to collapse during operation. The size of the obstacles can be up to 15-20 meters. The prepared torch is fired in the middle. After a while, the tongue is closed and the holes in the trench are opened. It is checked several hours a day and night to check for proper combustion. If there is a faster burning or non-burning part, burning holes are opened and closed so that the stack is evenly burned.
During the burning process, in the torch, first a water mist followed by a yellow smoke and finally a blue smoke consisting of carbon monoxide. The end of the blue smoke indicates that the coal mining is complete. With the completion of the coal milling, all the air holes in the torch are closed and the fire is extinguished and the cow is expected to cool. It takes 15-20 days depending on the size of the torch. After the cooling, the coal pile is ready to be packed.
WHY SHOULD NOT BE USED?
Since this very early period, this method has brought problems to the point where the torch is burning in the open air that releases harmful gases to atmosphere.
Since a homogenous combustion is not achieved, the output of the barbecue is increased to 1 / 10th of a kilogram,
It is takes between 15 and 20 days from the preparation of the torch, to the burning and cooling sludge to be completed.
The unhealthy conditions of the employees also cause other problems, such as fatal accidents caused by the formation of dents during the control of the quarry. The obtained charcoal quality does not provide homogeneous combustion and therefore some unburned wood left.
Our company, which researches applied systems in developed countries, has developed solutions to turn disadvantages to advantage in this sector. The CPS system, which is produced with the latest technological possibilities, turn the losses to profit.r
CARBON PYROLYSIS SYSTEM
When the organic substances are heated in an oxygen free environment (300 ~ 700 degrees), the thermal degradation process is called pyrolysis. . During the process, the solid product comes out of the charcoal and fixed carbon. The CPS is the most efficient technique for the extraction of the carbon in the wood.
This method, which is used today in United States and Europe, is applied for the carbonization of pellets obtained from wood, woody crusts, kernels, industrial wastes and wood chips and as fuel.
Oven (13 – 18% dry) is heated to 350 – 400 ° C in airless or oxygen-free environment, and the hydrogen, oxygen and nitrogen in the wood converts into a gas. By means of rotary use, carbon dioxide is emitted by turning the extracted gas into energy, where the flammable and free elements do not completely disappear (CHARCOAL) which is suitable for burning again.
EQUIVALIZING A HOMOGENEOUS FUNCTION IS EQUIVALENT WITH EFFICIENCY AND QUALITY INCREASING, EFFICIENCY AND QUALITY STANDARD CAN NOT BE CREATED THAT THE TORCH WAS FILLED ONLY ONCE.
When our company produces heat-controlled ovens, temperatures can reach 650-700C. Fuel and combustible materials inside the wood are completely burned and converted to industrial carbon (90-95%). Carbon is used in air and water treatment and other industrial spaces thanks to its porous structure at advanced level.
WITH THE CPS SYSTEM, WOOD IS CONVERTED TO CHARCAOL OR CARBON WITH THE MOST EFFICIENT WAY.
Dimensions: 3396 x 6320 x 3435
Volume: 3,44m³ x 2
Weight: 75 ton
Efficiency: 1000 kg Charcoal out of 4000 kg wood
The daily production capacity is 3000 Kg charcoal.
Charcoal is produced at a rate of roughly ¼ (250 kg) from 1000 kg of wood. Biological charcoal “, or ” also known as BBQ charcoal “is a carbonization of woody residues by heat treatment in an oxygen-free environment.
* The natural atmosphere does not affect the greenhouse because the gas and heat are not released,
* Designed for barbecue CHARCAOL and carbon production,
* Totally portable- you can move it to anywhere
* Does not need any energy after the first start
* Digital heat gauges and heat control system available,
* Agricultural and industrial waste does not provide economies with recycling
* The transformation of the fruit shells and cores, including carbon at high altitude, is a huge win for the whole of our country.
* No external fuel is after the first start.
* The latest technology in charcoal manufacturing in the United States is introduced to Turkey,